Aukahlutir fyrir Áriðla

RCC-02 Remote Control and

Programming Centre

RCC-02

The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.

 

RCC-03 Remote Control and

Programming Centre

RCC-03

The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.

Battery Status Processor BSP

BSP

One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender, VarioTrack and VarioString systems, a highly precise measuring and an extremely efficient algorithm that calculates the state of charge in the most accurate way.

Info to RCC02/03

  • State of charge
  • Voltage
  • Current
  • Time to go
  • Throughput energy
  • Battery temperature

Communication sets by internet with Xcom-LAN / Xcom-GSM

Xcom-LAN / Xcom-GSM

Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.
Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.
The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files.

Communication module Xcom-232i

Xcom-232i

The communication module Xcom-232i, equipped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings.
It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtender, VarioTrack or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, and microcontroller)..

Info to RCC02/03

  • State of charge
  • Voltage
  • Current
  • Time to go
  • Throughput energy
  • Battery temperature

Communication module Xcom-SMS

Xcom-SMS

The easiest access to remote energy systems

Xtender and/or VarioTrack/VarioString systems can now be constantly controlled from a mobile phone or smartphone from anywhere in the world. The communication device Xcom-SMS allows for connections to sites with a GSM (2G) coverage.

The Xcom-SMS is a cost effective add-on to your system easy to install and a plug-and play solution. It  provides a secured access to your installation by the simplest way: sending or receiving SMS to your remote power system.

Its extended features include:

  • Periodic or on demand operating reports
  • Selectable system´s event/alarm messages
  • Start / Stop the device
  • Control the auxiliary relays
  • Access to the parameters (Read & Write)
  • Reading the system information data
  • Changing the access code
  • Periodic reports and system alarms
  • Datalogging on SD card

Multi-protocol communication module Xcom-CAN

Xcom-LAN / Xcom-CAN

This tool enables the communication between BMS, Lithium Battery Management Systems, and products of the Xtender / VarioTrack / VarioString family. The Xcom-CAN makes it also possible for any device with a CAN bus (PC, PLC and microcontroller) to interact with all products of the Xtender / Vario family via a proprietary protocol. Like having the system controlled by a supervisor (SCADA) while giving the third system an access to all data (configuration parameters and datalog).

X-Connect Multi Xtender System

X-Connect

The pre-wired mounting offers a flexible and cost effective solution for high power systems (up to 63 kVA) based on the XTH inverter/charger.

The frame is supplied with :

  1. Pre-installed DC circuit breakers.
  2. Pre-installed DC fuses.
  3. Pre-installed DIN rails.
  4. Interconnection pipes and gland for auxiliary contact wiring.
  5. Interconnection pipes and gland for AC wiring.
  6. Interconnection pipes and gland + 90 mm2 wire terminated with appropriates ring tongues for DC wiring from Xtender to breakers and fuses.

RCM-10 Remote Control Module

RCM-10

Main on/off of the inverter

  • (Achieved by connecting a potential free contact between terminals 1 and 2)

Function input

  • (Driven by a dry contact between terminals 5 and 6, with a bridge between terminals 3 and 4 or by an AC or DC voltage of max 60 Veff between terminals 4 and 5)

External cooling fan (IP54) ECF-01

ECF-01

The ECF-01 is an external cooling fan (IP54) for the XTS and the VarioTrack series. Using this accessory will increase the power of the inverter. More than this, mounting it after installation is possible at any time.

Auxiliary relay module ARM-02

ARM-02

This module, only meant for the XTS and for the VT/VS models and for rail DIN mounting, is equipped with 2 auxiliary contacts controlled by the XTS or by the VT/VS. This function is already integrated in the models XTM and XTH.  Supplied with 3 m cable (Max. length 5 m). Suited for DIN rail mounting.